A2B Alva + Assembly
Posted by EBC Support on
Most electric bikes arrive packed in a box. A2B bikes will be partially disassembled in order to allow the bicycle to fit into a box that's more economical to ship. Most A2B Bikes ship with both wheels already attached and similar assembly is required for both the Octave and Entz models. We had one of our techs put together a video showing you the steps needed to complete you A2B Assembly of the Alva +

FOR THESE BIKES, YOU'LL NEED TO ASSEMBLE THE FOLLOWING COMPONENTS:
- Handlebars
- Pedals
- Reflectors, lights, or any other parts and accessories come packed with your bike. These are optional.
YOU'LL ALSO NEED TO DO THE FOLLOWING PREPARATIONS BEFORE RIDING YOUR ELECTRIC BIKE:
- Pump up the tires
- Charge the battery
- Check the derailleur and adjust if necessary
- Check the wheel spokes and true the wheels if necessary
- Check the brake pads for proper alignment and adjust if necessary
- Check the brake levers and brake cable for proper tightness and adjust if necessary.
- Check the height and alignment of the seat to assure it's properly installed for comfort and adjust if necessary.
TOOL USED FOR ASSEMBLY:
3/8" wrench
Allen wrenches size (3,5 & 6)
Phillips Screw Driver
A2B ALVA+ ELECTRIC BICYCLE TECHNICAL SPECIFICATIONS
Model | Alva+ 14AH |
Range |
Up to 55 miles |
Motor |
500-watt brushless DC hub motor |
Battery |
36 volts 13.2 amp-hours |
Top speed |
20 miles per hour with rider assistance |
Assistance |
Pedal assist or Power on demand |
Brakes |
Tektro Aurigia E-Comp hydraulic disc brakes |
Gearing Deraileur |
Shimano Alivio 7-speed |
Tires |
24-inch x 2.35-inch Kenda Krusader |
Frame |
17- or 20-inch 6061 aluminum Y-frame |
Display |
Backlit LCD with speed, estimated distance, riding mode, and battery charge |
Recharger |
Magnetic plug charger with built-in fan |
Curb Weight |
30kg (66lb) |
Charging time |
Three to four hours |
Share this post
Liquid error: Could not find asset snippets/relatedblogs.liquid
0 comment